Miller offers complete camera support for cinematic productions
To complete the company’s Fluid head offerings, Miller Tripods is introducing the CinX 8 and 9 large fluid heads, as well as the CinX 20, 23 and 25 smaller fluid heads at the NAB 2023.
With a capacity of 40kg/88lbs, the CinX 8 and 9 employ an ARRI compatible side loading camera plate. The CinX 8 is fitted with a 150mm, low profile clawball and the CinX 9 has a flat base, which may be attached to a Mitchell flatbase adaptor or a 150mm clawball.
Both heads have 16 positions of counterbalance steps and 7+0 position pan and tilt fluid drag system and are equipped with sturdy pan handles to reduce flex under heavy drag. The side loading ARRI-compatible camera plate with 150mm of travel, speeds up the setup of most rig configurations. Accessory mounting brackets, compatible with ARRI fittings, may be mounted on two locations on the pan section of the head.
At booth C4221, visitors can also check out the CinX 20, 23 and 25 smaller fluid heads, which employ Miller’s new Versa universal camera plate. Weighing up to 14kg/30.8lbs, the CinX 20 and 23 are fitted with a 7 5mm clawball while the CinX 25 employs a 100mm clawball.
All three have 16 positions of counterbalance.
CinX 20 has a payload capacity of 0-8kg/17.6lbs and 3+0 pan and tilt (P&T) soft drag positions. CinX 23 boasts of 0-10kg capacity, and 3+0 heavier P&T positions. The CinX 25 has a capacity of 14kg/30.8lbs and 5+0 P+T positions.
Find out more at the NAB show, which is taking place from April 16-19 at the Las Vegas Convention Centre.